Revision history for Scope-Upper

0.34    2023-03-26 16:00 UTC
        + Add : Contributing guidelines are now listed in the new
                CONTRIBUTING file.
        + Fix : [RT #146897] Scope::Upper does not know about RCPV
                cop_warnings, and does not know that given is deprecated.
                "given" related warnings were silenced, and the new RCPV
                interface is now used.
                Thanks Yves Orton for reporting and contributing a fix.
        + Fix : Assertion failures triggering on perl version 5.37.10 and
                higher with DEBUGGING enabled.
        + Fix : t/64-uplevel-caller.t has been taught about the new call frame
                numbering convention.

0.33    2021-12-20 20:30 UTC
        + Fix : [RT #114816] resources/remote/url points to web interface
                META files now follow version 2.0 of the CPAN META spec.
                Thanks Kent Fredric for reporting.
        + Fix : [RT #139823] : Perl 5 blead breads t/07-context_info.t
                t/07-context_info.t has been hardened against warning bits
                Thanks Jim Keenan and Tony Cook for reporting and contributing
                a fix.

0.32    2019-07-08 12:50 UTC
        + Fix : [RT #129539] : fails with v5.27.3 and later with DEBUGGING
                The module has been amended to accomodate with a change of
                behaviour of a core macro.
        + Upd : Contact info.

0.31    2018-08-26 19:50 UTC
        + Fix : [RT #125931] : localized SCALAR doesn't get imported
                localize '$Foo::x' => $var now properly imports $x into Foo.
                Thanks Vernon Lyon for reporting.

0.30    2017-11-04 15:55 UTC
        + Fix : [RT #123481] : Compatibility with CV-in-stash optimisation
                Thanks Father Chrysostomos for reporting and contributing a

0.29    2016-06-06 12:00 UTC
        + Chg : A large chunk of boilerplate XS code, which is also used in
                other XS modules, has been factored out of the main .xs file
                to a collection of .h files in the xsh subdirectory.
        + Fix : [RT #112246] : Blead breaks Scope::Upper
                Dave Mitchell provided a new implementation of reap(),
                localize_*() and uplevel() to match the new context stack
                handling in perl 5.24. Many thanks to him.

0.28    2015-08-18 15:00 UTC
        + Chg : SUB() and EVAL() will now warn if they cannot find an
                appropriate context in the current stack. They will still
                return undef in this case, which is interpreted as the current
                context when combined with other words.
        + Fix : [RT #104751] : Scope::Upper does not handle exotic stack types
                Trying to target a scope above the current perl scope will now
                result in a warning. In that case, the topmost context in the
                current stack will still be returned.
                Thanks Rafaël Garcia-Suarez for the report.
        + Fix : Test failures of threads tests on systems with harsh resource
                constraints causing the threads to exit() during run.
        + Opt : Some internal structures were shrunk, resulting in memory
                savings and small speedups.

0.27    2015-03-27 22:10 UTC
        + Chg : The new environment variable to enable thread tests on older
                perls is PERL_FORCE_TEST_THREADS. Note that this variable
                should only be turned on by authors.
        + Fix : Segfaults when the module is loaded by several threads (or
                Windows emulated processes) ran in parallel.
        + Fix : Memory leak with the uid() feature.
        + Fix : Update the Windows ActivePerl + gcc 3.4 workaround for
                ExtUtils::MakeMaker 7.04. Thanks Christian Walde for reporting
                and feedback on this issue.
        + Fix : reap(), localize(), localize_elem() and localize_delete()
                will again work correctly on perl 5.19.4+ when the debugger
                is enabled.
        + Fix : Silence some compiler warnings.

0.26    2015-03-12 23:30 UTC
        + Fix : [RT #100264] : Don't use CvPADLIST on XSUBs
                Thanks Father Chrysostomos for reporting and contributing a
        + Fix : Be really compatible with the optional OP_PARENT feature.

0.25    2014-09-21 17:10 UTC
        + Add : Support for the PERL_OP_PARENT optional feature introduced in
                perl 5.21.2.
        + Fix : Work around an assertion failure in perl 5.21.4.

0.24    2013-09-10 11:10 UTC
        + Fix : Lexicals returned with unwind(), yield() and leave() will no
                longer be lost on perl 5.19.4 and above.

0.23    2013-09-02 11:30 UTC
        This is a maintenance release. The code contains no functional change.
        Satisfied users of version 0.22 can skip this update.
        + Fix : [RT #87178] : typo fixes.
                Thanks for the patch.
        + Fix : [RT #88177] : 5.19.3 block hint test breakage
                t/07-context_info.t has been taught about perl 5.19.3.
                Thanks Andrew Main for the patch.
        + Tst : Author tests are no longer bundled with this distribution.
                They are only made available to authors in the git repository.
        + Tst : "given is experimental" warnings when running tests on perl
                5.18 and above have been silenced.

0.22    2013-01-30 23:35 UTC
        + Chg : perl 5.6.1 is required.
        + Fix : context_info() now ignores %warnings::Bits for perl 5.8.6 and
                below, just like caller().
        + Fix : [RT #82220] : Scope-Upper-0.21 test stuck on Windows perl 5.12.3
                t/93-pod-spelling.t will not crash anymore on perl 5.12 and
                Thanks Gabor Szabo for reporting and Slaven Rezic for debugging
                this issue.
        + Tst : Rare test failures of t/07-context_info.t on perl 5.6,
                t/55-yield-target.t on perl 5.[68], and t/63-uplevel-ctl.t on
                perl 5.8.[345] have been addressed.

0.21    2012-09-21 15:10 UTC
        + Fix : context_info() has been taught about perl 5.17.4.
        + Fix : t/07-context_info.t will no longer fail with perls that have
                sitecustomize enabled (like many perl builds for Windows).
                Thanks Steve Hay and Nicholas Clark for debugging help.
        + Fix : Broken linkage on Windows with gcc 3.4, which appears in
                particular when using ActivePerl's default compiler suite.
                For those setups, the Scope::Upper shared library will now be
                linked against the perl dll directly (instead of the import

0.20    2012-09-17 11:00 UTC
        + Add : The new yield(@values, $context) function can be used to return
                values to any upper scope, including do or map blocks.
                The new leave(@values) function is an alias for
                yield(@values, HERE).
        + Add : The new context_info($context) function return information
                about context $context, similarly to what caller() provides
                but for any upper scope.
        + Chg : Contexts are now normalized. In previous versions, it was
                possible for different contexts to refer to the same scope :
                for example, "for (my $i = 0; $i < 10; ++$i) { ... }" was
                reachable through two contexts, while "for (@array) { ... }"
                only by one. Starting from this version, contexts are
                normalized so that they always represent an actual scope.
        + Doc : C++ compilers are officially NOT supported.
        + Fix : Building with a more recent version of perl 5.17.4.
        + Fix : Debugger compatibility with perl 5.17.1 and above.

0.19    2012-09-01 13:25 UTC
        + Doc : POD headings have been made linkable.
        + Fix : Building with perl 5.17.4.
        + Fix : BUILD_PREREQS are now set for ExtUtils::MakeMaker.
        + Opt : uplevel() private data structure is 7% smaller on 64 bits
        + Tst : Author tests overhaul.

0.18    2011-10-10 20:50 UTC
        + Add : The uid() function returns an unique identifier for each dynamic
                scope. The validate_uid() function can be used to check whether
                one such identifier is valid (i.e. that the scope it refers to
                is still alive).
        + Chg : It is no longer possible on perl 5.6 to call goto() in an
                uplevel callback to replace the uplevel call. This change was
                needed in order to ensure consistency between platforms
                regarding to the following fix just below.
        + Fix : The uplevel() tests now pass on Windows.
                Thanks C.H. Kang for bringing this to my attention.

0.17    2011-10-03 21:45 UTC
        + Fix : uplevel() will now use the correct pad when executing its
                callback. This fixes at least two issues :
                - closures defined inside the uplevel callback can now correctly
                access lexicals from inside and outside the callback.
                - state variables in the uplevel callback now work properly.
        + Fix : It is now generally possible to call goto() in the uplevel'd
                code to replace the uplevel stack frame. There are two cases
                for which it is still not possible :
                - if -D flags were set when running perl (as in "perl -Dt ...").
                - if the perl runloop has been replaced with a custom one by
                another module.
                If uplevel() detects that the replacement code contains a goto
                statement, and is in one of those two cases, then it will refuse
                to execute the callback and throw an exception.
                Note that this fix implies a run-time overhead of uplevel()
                proportional to the size of the the callback in every case
                (with a small ratio), and proportional to the size of ALL the
                code executed as the result of the uplevel call (including
                subroutine calls inside the callback) when a goto statement is
                found in the uplevel callback.
        + Fix : uplevel() has been taught how to handle XS callbacks properly.
        + Fix : The cause of "Attempt to free unreferenced scalar" warnings
                when using uplevel() has been addressed.
        + Fix : [RT #71212] : build failure on Windows.
                The module does no longer rely on calling Perl_cv_clone, which
                isn't exported.
                Thanks C.H. Kang for reporting.

0.16    2011-09-03 23:00 UTC
        + Add : uplevel($code, @args, $cxt) executes $code with arguments @args
                in the upper context pointed by $cxt.
                This is an XS version of the well-known uplevel() routine from
                Sub::Uplevel. There are a few differences between both
                implmentations that are listed in the documentation.
                The XS version is roughly 10 times faster than the pure-Perl

0.15    2011-08-24 14:20 UTC
        + Fix : Localizing subroutines in an higher scope will now correctly
                update the method cache.

0.14    2011-02-27 00:00 UTC
        + Fix : [RT #64997] : Compatibility with perl 5.13.10.
                Thanks Dave Mitchell for the notice.
        + Tst : Lengthy tests have been ported to Test::Leaner, making the
                whole test suite about 50% faster.

0.13    2010-12-20 01:00 UTC
        + Fix : [RT #61904] : Stack corruption when using unwind() under
                Thanks Sergey Aleynikov for contributing a fix.
        + Fix : [RT #63378] : Compatibility with perl 5.13.8.
                Thanks Andreas J. König for bisecting the issue.
        + Tst : Threads tests are now only run on perl 5.13.4 and higher.
                They could segfault randomly because of what seems to be an
                internal bug of Perl, which has been addressed in 5.13.4.
                There is also an environment variable that allows you to
                forcefully run those tests, but it should be set only for
                author testing and not for end users.

0.12    2010-05-19 00:45 UTC
        + Fix : Compatibility with perl 5.13.
        + Fix : Test failures with perl 5.8.0.
        + Fix : A minor leak of SVs when a non array/hash was passed to

0.11    2010-04-16 23:20 UTC
        + Chg : It's now forbiddent to pass a reference to a non-glob variable
                as the localization target of localize(), localize_elem() and
        + Chg : localize_elem() now only accepts localization of arrays or hashs
                elements. For other types, it used to be a synonym of localize.
        + Chg : localize_elem() no longer accepts a glob as the target. You now
                have to specify the variable as a string. This is because it was
                impossible in this case to handle meaningfully the array or the
                hash reference passed as the assigned value.
        + Doc : The synopsys was revamped, and the rest of the documentation was
        + Fix : [RT #55593] : Segfault when localizing hash or array element to
                different package in different file.
                Thanks Dagfinn Ilmari Mannsåker for reporting.
        + Fix : [RT #56301] : reap loses eval context when dying naturally.
                Thanks Andrew Main for reporting.
        + Fix : Scope inconsistencies and segfaults when saving several
                localizations into the same target scope.
        + Fix : Stop skipping frames as a pop optimization. This caused breakage
                under the debugger (and most likely outside as well).

0.10    2010-01-18 23:50 UTC
        + Fix : Properly handle given/when on 5.10.
        + Fix : Some stack inconsistencies were fixed, though they were unlikely
                to have an impact on your real-life code.
        + Fix : Work around Kwalitee test misfailures.

0.09    2009-05-17 20:20 UTC
        + Add : The new SU_THREADSAFE constant can be used to know whether the
                module could have been built with thread safety enabled.
        + Chg : Thread safety is disabled for perl 5.8 on Win32.
        + Chg : A saner workaround for the "call_sv() during LEAVE clobbers the
                still used last popped stack element" issue on 5.10.

0.08    2009-04-16 22:50 UTC
        + Fix : [RT #44204] : Stack corruption with reap(). Thanks Torsten
                Foertsch for reporting.
        + Fix : Building with Solaris CC.
        + Tst : unwind() in threads.

0.07    2009-02-20 00:20 UTC
        + Chg : The CLONE method will no longer be defined for non-threaded
        + Doc : Some examples on how to build the target context from the words.
        + Fix : Some unlikely possible uninitialized reads, indirectly pointed
                out in a Redhat review request.
        + Fix : "localize *x, 'y' => $cxt" now matches Perl's behaviour for
                "local *x = 'y'".
        + Fix : Miscellanous code cleanups, courtesy of Florian Ragwitz.
        + Upd : Resources in META.yml.

0.06    2009-01-17 00:05 UTC
        + Chg : INCOMPATIBLE CHANGE: The level is now absolute and no longer
                relative to the current frame - we'll call it "context" from now
                on. You should replace all your raw levels by combinations of
                The old behaviour of "=> $n" can be easily reobtained by using
                "=> SCOPE($n)".
        + Fix : As a result of this change, the module now plays nicely with
                the debugger.

0.05    2009-01-12 18:15 UTC
        + Fix : Stack mess when using unwind() in scalar context.
        + Fix : Returning an automatic variable isn't wise, so let's use a
                context instead.
        + Doc : Clarifications.
        + Tst : Stress tests for unwind().

0.04    2009-01-11 18:40 UTC
        + Add : unwind(@things, $level), that returns to an upper context.
        + Add : want_at($level), that gives the wantarray for $level.
        + Add : Control words, to reliably get the level of the n-th upper
                subroutine or eval scope. TOPLEVEL was renamed to TOP.
        + Fix : Tests with 5.6.
        + Tst : Reordering and factoring some of the stress tests so that they
                aren't needlessly ran several times.

0.03    2009-01-04 15:55 UTC
        + Add : localize_delete(), that localize array/hash elements in upper
        + Fix : Segfault when localizing array elements with an invalid negative

0.02    2008-12-28 18:40 UTC
        + Doc : Clarifications and improvements.
        + Fix : Missing compatibility macros.
        + Fix : Localized nonexistant array elements should be deleted when
                their time comes so that the array recovers its original length.

0.01    2008-12-26 16:05 UTC
        First version, released on an unsuspecting world.